Topping Bar Buffet – Counter Drop-In Style (Refrigerated)

$6,910.00$12,219.00

Drop-In Topping Bar that requires electricity

SKU: TB_DropIn Categories: , Tags: ,

This item is a Drop-In Topping Bar that requires electricity.  There are several sizes available from a 6 Topping bar to a 36 Topping Bar.

Lids, trays, 12 month parts/labor warranty and free shipping are included with all selections within the Continental US.  Optional sneeze guard is available to purchase separately for $1295.

2 week lead time – Full payment required to confirm order and start lead time

Standard Features:

  • Refrigerated copper tubing, within the 3″ recess, around all sides – meets your toughest health department standards
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied gasket – makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12″ x 20″ pans with the use of separator channel(s) and pan rails, or fractional size pans with the use of optional adapter bars.
  • 1-year Parts & Labor Warranty
  • NSF Certified; UL Recognized

Accessories:

  • 5YW – 5-Year Compressor Warranty
  • WFB – Stainless steel perforated false bottom
  • Stainless Steel adapter bars (pg S1-51-52)
  • Stainless Steel adapter plates (pg D1-51-52)
  • CP – Cover Plate with handles, S/S
  • 2060-1 – Condensate Evaporator
  • RS – Remote on/off switch for counter mounting
  • RDVE – Rear Drain Valve Extension
  • Default version is 120 volt for ease of installation
  • 220 volt – 50 cycle compressor version available upon request (*The 220 volt version is not UL listed.)

 

Specifications:

Top: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead.  There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top.  Embossed mounting lugs are provided along the inner surface, 3″ down from the top, to hold the pan rails and a full set of removable separator channels in place.

Liner: The inner liner shall be 18 gauge, type 304 stainless steel with a 3″ receded top, one piece construction, all welded, ground and polished to a uniform finish.  All corners are covered with a minimum 1/4″ radius.  The liner has copper tubing firmly soldered to the top 3″ on all sides. A 3/4 diameter drain with strainer, 4″ PVC nipple, and valve are provided.

Insulation: The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

Refrigeration System: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit.  A fully self-contained condensing unit is provided with the hermetically sealed compressor and digital electronic thermostat/thermometer.  The system is fully charged with CFC free refrigerant and ready to operate.

Note: Proper ventilation must be provided in the counter.

Electrical: The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off switch and pilot light.  A 6′ long, 3-wire cord and plug (NEMA 5-15p) will be provided.  Installation is the responsibility of the purchaser.

Specifications subject to change without notice.

SNEEZE GUARD

Specifications:

Construction:

  • 1″ Round Tubing
  • 2″ Heavy Duty Flanges
  • Glass Brackets accept 1/4″ or 3/8″

Available Finishes:

  • #4 Brushed Stainless Steel
  • #4 Brushed Aluminum
  • Powder Coated Black

Glass:

  • 1/4″ or 3/8″ Clear Tempered Glass with polished Edges
  • 3/4″ Radiused Corners Available
  • Maximum Spacing Between Posts:
    • 42″ Center to Center with 1/4″ Glass*
    • 54″ Center to Center with 3/8″ Glass*
      • *Tempered Glass Required

Options:

End Panels:

  • Left Closed End Panel
  • Right Closed End Panel

Finish:

  • #4 Brushed Stainless Steel
  • #4 Brushed Aluminum
  • Powder Coated Black

Glass Options:

  • 3/4″ Radiused Corners
  • Standard Square Corners

Glass Thickness:

  • 1/4″ Glass (Maximum Span 42″)
  • 3/8″ Glass (Maximum Span 54″)

Weight 100 lbs
Dimensions 70 × 48 × 60 in
Size

6 Topping, 12 Topping, 18 Topping, 24 Topping, 30 Topping, 36 Topping